DESCRIPTION
The CG (commercial-grade) Hayes Digital Heating Tool is a 110V plastic pipe welder for socket fusion. It is suitable for joining a variety of thermoplastic pipes and fittings (up to 4 inches) for different applications in the industry. This machine can weld pipe made of Polyethylene (PE, HDPE, MDPE), Polypropylene (PPR), Polybutene (PB). The iron has a reinforce heat resistant aluminum plate to give optimal performance for heat preservation with a digital screen control to adjust the temperature for the most accurate heating temperature. The internal electric board delivers precise and sensitive heat transference between the outside heating plate and the digital board. It can adjust to the environment temperature in seconds and it also has an ergonomic handle for ease of use. You can switch the temperature mode between Fahrenheit and Celsius. This heating tool is designed and manufactured according to the American international standard ASTM F2620.
PROCEDURE / APPLICATION
Definition according to the ASTM F2620: The socket fusion technique consists of simultaneously heating both the external surface of the pipe end and the internal surface of the socket fitting to a designated temperature, then fuse them together by application of a sufficient force. Thereby resulting in fusion.
Socket fusion tools consist of a heating tool, heating adapter, cold rings pliers and chamfer/depth gages.
TECHNICAL INFORMATION
| Heating Tool | CG4 |
| Working range (Inches) | ½” – 4” IPS |
| Power | 1400W |
| Voltage range | 110V |
| Frequency | 50 / 60Hz |
| Display Temperature | Fahrenheit / Celsius |
| Temperature setting range | 356°F – 536°F |
| Factory Setting | 500 ± 10°F |
| Socket temperature range | 500 ± 10°F |
| Warning Temperature | >550°F |
| Environment temperature | -68°F – 140°F |
| Relative humidity | 45% – 95% |
| Insurability Resistance | ≥1MΩ |
| Leakage Current | ≦5Ma |
| Weight | 7.2 LB (7” x 2” x 15”) |
- Heating tool features
- Heat resistant aluminum plate
- Digital screen with adjustable temperature control
- Accurate heating temperature
- Automatic adjustable environment temperature
- Ergonomic handle
- Durable and efficient to maximize the pipe fusion
- Voltage protection
- Different working pipe sizes
IMPORTANT NOTES
Welding procedure
- Skill and knowledge are required to obtain a good quality joint.
- Ensure you select the proper temperature according to the pipe manufacturer’s recommendation.
- It is important to know the technical information before you use your heating tool.
Heating adapters: You can purchase all socket accessories at www.hayesfusion.com
Welding parameters: Pipe and fitting manufacturers have established qualified fusion procedures which should be followed precisely. You should obtain a copy of the pipe manufacturer’s procedures or appropriate joining standard for the pipe being fused.
Heating iron temperature: To meet pipe manufacture’s temperature specifications, the surface temperature of the heating adapters should be measured with a surface pyrometer prior to initial use and at reasonable time intervals thereafter.
Ensure you test the temperature on the surface of the heating adapters and not on the heating plate itself. The heater’s built-in thermometer indicates internal temperature and should only be use for reference.
CAUTION
Heating iron
- The heater is to be used with AC power only. Check heater to confirm correct power requirements and only use a power source with the correct voltage and current capacity.
- Connect heating tool to power and permit sufficient preheating to stabilize the temperature before the welding process.
- When welding, if temperature adjustment is needed, please turn off the heating tool first and turn it on again to adjust the new temperature. Adjustment of the temperature when it is already set will damage the temperature control components.
- It is recommended to use an insulated heater bag to store the heating tool when it is hot.
WARRANTY CERTIFICATE
LIMITED WARRANTY
Hayes warrants all products distributed. All products have 12 months warranty against manufacturer’s defects from the date of purchase directly from Hayes or Hayes authorized dealers. Furthermore, this warranty only covers factory defects.
RETURN OF GOODS
Buyer must receive written authorization directly from Hayes or Hayes authorized dealer before any returns. The goods must be in the same condition as received. The buyer has 15 days to request a return of goods after the date of the purchase. Buyer is responsible for return freight for any reason other than manufacturer’s defects.
IMPROVEMENT
Hayes reserves the right to make any changes in or improvements on its products without incurring any liability or obligation to update or change previously sold machines and/or the accessories.
PROPRIETARY RIGHTS
All proprietary rights pertaining to the design, colors, and branding, are exclusively the property of Hayes.
